樂玩棋牌

常州億創從事精密乐玩棋牌為主的乐玩棋牌型企業

乐玩棋牌

示例圖片三
網站首頁 > 行業資訊 > 時事新聞

那些因素導致環氧地坪漆產生流痕?怎么解決

2019-06-26 22:13:26 乐玩棋牌 閱讀

什么是環氧地坪流痕?有時候我們可能在一些正在施工中的環氧地坪漆上,看到一道道像淚痕的痕跡,這種痕跡被稱為“流痕”,是在環氧地坪漆在噴涂過程中受各種因素影響造成的漆膜向下流淌而形成的。造成這種痕跡的原因有哪些呢?1、環氧地坪漆施工的環境差(環氧地坪乐玩棋牌漆施工環境溫渡過高或過低;環境中的溶劑蒸汽含量過高;施工現場空氣不流通) 。

What is epoxy floor paint flow marks? Sometimes we may see a tear-like trace on some epoxy floor paints under construction. This trace is called "flow marks", which is formed by the downward flow of paint film caused by various factors during the spraying process of epoxy floor paints. What are the causes of this trace? 1. The construction environment of epoxy floor paint is poor (the temperature of the construction environment is too high or too low; the content of solvent vapor in the environment is too high; the air in the construction site is not circulating).

2、施工時由于噴涂操作不當導致漆膜出現流痕現象,噴槍與地面靠得太近或者移動噴槍的速度太慢等等都會造成施工厚度超標。對于噴槍的設定要適當,噴槍也會影響環氧耐磨地坪的質量,如果噴槍噴涂的幅度小就應該對應減小出漆量。施工人員的技術也是造成漆膜出現流痕的因素之一。環氧地坪漆在噴涂過程中一定要按照環氧地坪漆施工工藝把控好漆膜厚薄,比較厚的涂膜比較難干,就容易向下流淌形成流痕。

2. Due to improper spraying operation, the paint film appears flow marks. Too close the spraying gun to the ground or too slow moving speed of the spraying gun will cause the construction thickness to exceed the standard. For the spray gun setting to be appropriate, the spray gun will also affect the quality of the epoxy wear-resistant floor, if the spray gun spraying range is small, it should correspondingly reduce the amount of paint. The technology of the builder is also one of the factors that cause the flow marks of the paint film. In the spraying process of epoxy floor paint, we must control the thickness of the paint film according to the construction technology of epoxy floor paint. Thicker film is difficult to dry, so it is easy to flow downward to form flow marks.

3、環氧地坪乐玩棋牌漆與稀釋劑不配套,或是運用過多防潮劑,涂料粘渡過低都會形成流痕現象。

3. If the epoxy floor paint is not compatible with the diluent, or if too much moisture-proof agent is used, too low adhesion of the paint will result in flow marks.

流痕的防治方法:

乐玩棋牌The prevention and treatment methods of flow marks are as follows:

1、漆刷蘸漆不要過量;

1. Don't dip too much paint in the brush.

2、添加防流掛劑;

2. Adding anti-flow hanging agent;

3、適當調整粘度;

乐玩棋牌3. Adjust the viscosity properly.

4、氧環氧地坪漆進行打磨。



標簽:  地坪 環氧地坪漆 環氧地坪施工 乐玩棋牌 鈑金 加工 鈑金機箱
广东快乐十分钟开奖直播